Regular D95 P2 Respirator - W376M (Box of 25)
The D95 is a single-use P2 respirator mask designed to filter out non-oil based airborne particles. Featuring a lightweight flat fold design, the mask expands into a convex-shaped device with two bands and a FitClipTM to hold the mask in place.
- Designed and tested to meet performance requirements of a P2 Class Respirator specified by AS/NZS 1716:2012 Respiratory Protective Devices
- Non-sterile & Latex Free
Testing Standards
- Meets performance requirements of a P2 Class Respirator specified by AS/NZS 1716:2012 Respiratory Protective Devices
Securing Respirators with the D95 Band & FitClip™ Combination
The D95 P2 Respirator is designed to achieve a comfortable and adequate seal by joining the mask’s two bands with the FitClip™. Available in two sizes, the FitClipTM allows flexibility in the adequate fitting of respirators. The FitClipTM offers a secure hold point on one end, and an open end for ease of attaching and removing the second mask band.
The Detmold Medical range of D95 P2 Respirators have the Regular Fitclip™ already attached, and where a longer band is required, the XL FitClip™ can be ordered separately.
An inadequate seal between the Respirator and the face can result in contaminated air entering the mask, please refer to your appropriate Respirator Fit Test Procedure to determine the required combination of mask and FitClip™.
Please see the D95 P2 Respirator with FitClip™ Instructions for Use & Fit Testing Procedure documents.